Looking for dependable EPS insulation in Pakistan?
Style Group of Industries manufactures lightweight, rigid expanded polystyrene sheets that reduce heat transfer in roofs, walls, floors and cold storage. Our Thermapore EPS range is made in controlled conditions and can be cut to the thickness and density your project needs, whether you are building a new home or upgrading an existing structure.
How EPS Insulation Is Manufactured
Thermapore EPS is made by expanding small polystyrene beads with steam and molding them into lightweight, rigid foam blocks. Careful control of temperature, density and molding pressure creates a uniform cellular structure, which is what gives the material its steady insulating performance. The blocks are then cut into sheets and boards according to construction, packaging and industrial requirements.
At Style Group of Industries, production focuses on consistent quality and dimensional accuracy, so every sheet delivers a balanced mix of strength, low weight and thermal resistance.
Where EPS Insulation Is Used
EPS sheets are used in many building and industrial applications:
- Roofs: reduces heat entering the building in hot summers and lowers cooling load.
- Walls: helps keep indoor temperatures stable in residential and commercial buildings.
- Floors and ceilings: adds a thermal layer without adding heavy structural load.
- Cold storage: supports temperature control where cooling efficiency matters.
- Packaging and insulated boxes: protects temperature-sensitive and fragile products during transport.
Because the sheets are light and easy to cut, contractors can install them quickly and adapt them to different building designs.
Benefits of EPS Insulation for Energy-Efficient Buildings
Good insulation reduces unwanted heat gain and heat loss, so air conditioners and heaters do not have to work as hard. Over time this supports better indoor comfort and lower energy use.
Other practical benefits include:
- Lightweight, so handling is easy and structural load stays low
- Easy to cut and shape on site
- Cost-effective compared with many other insulation materials
- Resistant to moisture under normal installation conditions
- Available in different thicknesses and densities
EPS vs XPS: Which Insulation Should You Choose?
Both EPS and XPS are polystyrene-based insulation, but they suit different needs. EPS is a cost-effective, lightweight choice for general roof, wall and floor insulation. If your project needs higher compressive strength or constant contact with moisture, our XPS insulation board may be the better fit. Our team can help you choose based on your application and budget.
Why Choose Style Group of Industries
Style Group of Industries supplies Thermapore EPS solutions for residential, commercial and industrial projects across Pakistan. We pay attention to material consistency, accurate cutting and practical application needs, so you get insulation that performs as expected.
Beyond sheets, we also offer EPS packaging and pipe insulation for related requirements.
Style EPS Properties (ASTM C578)
Technical properties of Style EPS (Expanded Polystyrene) as per ASTM C578. Type IX is highlighted.
| Property | ASTM C578 | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Type XI | Type I | Type VIII | Type II | Type IX | Type XIV | Type XV | |||
| Nominal Density | lb/ft³ (kg/m³) | 0.75 (12) | 1.00 (16) | 1.25 (20) | 1.50 (24) | 2.00 (32) | 2.50 (40) | 3.00 (48) | |
| Density, min. | lb/ft³ (kg/m³) | 0.70 (12) | 0.90 (15) | 1.15 (18) | 1.35 (22) | 1.80 (29) | 2.40 (38) | 2.85 (46) | |
| Design Thermal Resistance per 1.0 in. thickness | 25°F | °F·ft²·h/Btu (°K·m²/W) | 3.60 (0.63) | 4.35 (0.77) | 4.55 (0.80) | 4.76 (0.84) | 5.00 (0.88) | 5.00 (0.89) | 5.10 (0.90) |
| 40°F | °F·ft²·h/Btu (°K·m²/W) | 3.43 (0.60) | 4.17 (0.73) | 4.25 (0.75) | 4.55 (0.80) | 4.76 (0.84) | 4.76 (0.84) | 4.85 (0.85) | |
| 75°F | °F·ft²·h/Btu (°K·m²/W) | 3.22 (0.57) | 3.85 (0.68) | 3.92 (0.69) | 4.17 (0.73) | 4.35 (0.77) | 4.35 (0.77) | 4.45 (0.78) | |
| Thermal Resistance, min per 1.0 in. thickness | 25°F | °F·ft²·h/Btu (°K·m²/W) | 3.45 (0.61) | 4.20 (0.74) | 4.40 (0.77) | 4.60 (0.85) | 4.80 (0.84) | 4.80 (0.84) | 4.90 (0.86) |
| 40°F | °F·ft²·h/Btu (°K·m²/W) | 3.30 (0.58) | 4.00 (0.70) | 4.20 (0.74) | 4.40 (0.77) | 4.60 (0.81) | 4.60 (0.81) | 4.70 (0.83) | |
| 75°F | °F·ft²·h/Btu (°K·m²/W) | 3.10 (0.55) | 3.60 (0.63) | 3.80 (0.67) | 4.00 (0.70) | 4.20 (0.74) | 4.20 (0.74) | 4.30 (0.76) | |
| Compressive Strength @ 10% deformation, min. | psi (kPa) | 5.0 (35) | 10.0 (69) | 13.0 (90) | 15.0 (104) | 25.0 (173) | 40.0 (276) | 60.0 (414) | |
| Flexural Strength, min. | psi (kPa) | 10.0 (69) | 25.0 (173) | 30.0 (208) | 35.0 (242) | 50.0 (345) | 60.0 (414) | 75.0 (517) | |
Scroll sideways on mobile to see all types.
Frequently Asked Questions About EPS Insulation
EPS insulation is commonly used in roofs, walls, floors, ceilings, cold storage and industrial applications. It reduces heat transfer and supports better indoor temperature control.
Thermapore EPS is lightweight, cost-effective, easy to install and provides reliable thermal insulation. It also helps improve energy efficiency by reducing the load on heating and cooling systems.
We focus on consistent quality, accurate manufacturing and dependable insulation performance for residential, commercial and industrial projects across Pakistan.
Need Style EPS for your project?
Call 0300-8887446 | UAN 111-888-808 or request a quote online.